Commercial · Access Control
Access Control, RFID Door Scanner & Security Cameras
RFID entry, door receiver repair and a camera system added at a commercial building, coordinated with a licensed electrician.
Overview
The owner wanted controlled entry and camera coverage at a commercial building shared by a warehouse and showroom. Gazelle scoped the system, ran the low-voltage paths, mounted the hardware and coordinated a licensed electrician for the power side. Later, a failed RFID door scanner and receiver were repaired.
The Challenge
Cabling had to cross an open warehouse ceiling and reach the front entry without visible runs in finished areas. The entry hardware had to work with the existing steel door and frame.
The Work
Camera and network cabling was run back to a rack, cameras were mounted at the yard, entries and warehouse floor, and the recorder and monitor were set up. An RFID reader was installed at the front door with the control board in a cabinet. The scanner and receiver were later repaired under a separate work order (August 2025).
Where It Stands
Entry is card-controlled and the property has camera coverage. Property managers reach out to us for this kind of work regularly.
Have a similar project?
Send the property, what it needs and where it stands. We’ll review the scope and come back with next steps.